
24 Apr Installing colorbond fencing posts
In this article we will be showing you how to install colorbond good neighbour fencingposts, its not very hard once you have been told how to do it.1) establish where your boundaries are and run a string line from one end of the boundary to the other.2) Once this is done get yourself a panel fence rail used for the construction of a good neighbour fence and use it as a spacer to mark out were each posts will go, best to use spray paint to mark your holes.3) dig, dig and dig some more, this will test your girly hands to see if your a real man, i sometimes come back from holidays and my hands are soft and i get plenty of blisters on my first few weeks back on the job.4) colorbond fencing posts are needed to be screwed back to back to make up one panel fence post, do so and make sure you put in at least 7 screws in each for a standard 1.8m high fence, do it like a good fencing contractor.5) lay them out at each hole and get yourself a level and start mixing up some cement.6) slide in you posts using your spacer and level and leave them over night before you start sheeting your good neighbour fence.Well that is pretty much how it is done at lee benson fencing.We also know do frameless glass pool fencing in Adelaide.